2-in-1 Motor and Controller
- Series
- Lite / Elite / Mage
- Voltage range
- 80–620 VDC
- Representative products
- Lite-180/200Elite-210/220Mage-380
- Typical applications
- Forklifts · Excavators · Aerial work platforms · Compact loaders · Agricultural machinery
Electric drive systems.Powered by Panovation.
As a high-tech enterprise integrating R&D, production and sales, we build on electronic control technology to bring next-generation electronic control products to construction machinery. By connecting control, manufacturing, testing and validation in a closed loop, we improve the quality of project delivery.
Intelligent Test Analysis & Validation Platform
Bring automated testing, CAN/HIL, controller I/O, field signals, and test data into a unified analysis workflow to support prototype validation and production consistency.
- Intelligent Test AnalysisAnalyze test curves, anomalous signals and control responses to help locate issues and optimize parameters.
- Controller ValidationCover MCU, VCU, CAN/HIL, automated I/O testing, and system-level control integration testing.
- Closed-Loop Mass ProductionConnect prototypes, validation, production-line consistency, and field feedback within a single engineering cycle.
MCU I/OAutomated testing and validation of controller I/O.
VCUVehicle control unit development and control-strategy integration.
CAN / HILCAN bus communication and hardware-in-the-loop (HIL) testing.
Power ElectronicsPower devices, driver-board subsystems, and power-management interfaces.
Intelligent Calibration & DiagnosticsIntelligent assistance for calibration, diagnostics, and test analysis.
Test Bench & AutomationTest-bench and automated testing workflows that support production consistency.
Control StrategyStrategies for torque, energy consumption, thermal protection, and interface coordination.
A Full-Platform Product Portfolio
Four product lines covering the full voltage range from 48 V to 811 V.
Controller Assembly
- Series
- Controller series
- Voltage range
- 48–450 VDC
- Representative products
- Multi-in-one · DCACSingle/dual controllersLow-voltage single/dual controllers
- Typical applications
- Forklifts · Excavators · Street sweepers · Road rollers
Motor Assembly
- Series
- Genesis series
- Voltage range
- 48–811 VDC
- Representative products
- 180 / 200 / 210 / 220 / 230 / 310 / 380 platforms
- Typical applications
- Forklifts · Loaders · Heavy-duty trucks · Concrete mixer trucks
High-Voltage Power Distribution
- Series
- PDU / HVJB
- Voltage range
- 120–450 VDC
- Representative products
- PDU (power distribution unit)HVJB (high-voltage junction box)
- Typical applications
- Forklifts · Excavators · Loaders · Pickup trucks
Integration Capabilities
Supports single-motor, dual-motor, multi-in-one, split, and other topologies, with one product portfolio adaptable to a wide range of vehicle architectures.
Start with Operating Conditions, Not the Specification Sheet
Applications include forklifts, loaders, excavators, tractors, and other types of machinery. Identify the machine type first, then begin the technical discussion.
-
Forklift
Compact, high-torque electric drives for traction and lifting during frequent starts and stops and load handling.
-
Loader
High-torque electric drive for traction and hydraulic functions in heavy-duty loading and continuous operation.
-
Excavator
High-power-density electric drive and thermal management for slewing and heavy digging.
-
Tractor
Wide-speed-range electric drive and control strategy to match field traction and PTO loads.
-
Aerial work platform
Smooth low-speed control and safety redundancy for lifting and platform work.
Building Green Electric Drive with Our Customers
Together with construction machinery OEMs and system integration partners, we continue to adapt green electric drive platforms to representative operating conditions.
LiuGong
XCMG
Kawasaki Heavy Industries
SANY
LonkingLiuGongXCMGKawasaki Heavy IndustriesSANYLonkingSupport from Solution Definition through After-Sales Service
Across the lifecycle of construction machinery electronic control, power, and control-system projects, we provide a support path from technical consultation through support after mass production begins.
Project consulting
Selection and solution consulting based on equipment operating conditions.
After-sales service
Technical support and response for volume projects.
Return-for-Repair Process
A clear return, repair, and inspection process to reduce downtime.
Feedback
We continuously collect field feedback to inform product iteration.
About Panovation · Company Positioning
A leader in electronic control systems for new-energy construction machinery.
创崎新能源技术（上海）有限公司 was founded in Shanghai in 2020 and is a national high-tech enterprise. The company specializes in the development and support of electronic control systems for new-energy construction and agricultural machinery, delivering high-performance, highly reliable new-energy drive system solutions.
Strategic Partnership
Close strategic collaboration with Kawasaki Heavy Industries, with technology benchmarked against global leaders.
R&D Team
Led by a former senior engineer at Tesla, the team includes two VPs of Technology specializing in electric drives and motion control, and in power electronics and IC design. Their expertise spans electric-vehicle drives, vehicle-to-grid (V2G), servo drives, power-conversion circuit architectures and system optimization, switching-converter modeling and advanced control. They have published more than 10 SCI/EI-indexed journal and conference papers and over 30 journal papers, respectively. One has a decade of Silicon Valley experience, previously served as Senior Engineering Manager for IC Design at Analog Devices, and is an Associate Editor of IEEE Transactions on Power Electronics.
Industry–Academia–Research Collaboration
Joint industry–academia–research platforms with Jilin University, Southeast University, and the University of Electronic Science and Technology of China.
Quality Systems
IATF 16949 · ISO 9001
About Panovation
As a high-tech enterprise integrating R&D, production and sales, we build on electronic control technology to bring next-generation electronic control products to construction machinery. By connecting control, manufacturing, testing and validation in a closed loop, we improve the quality of project delivery.
Registered in Shanghai Lingang, with R&D, manufacturing and project delivery in Nanjing Qixia.
Ongoing development of intellectual property in controllers, test systems, mechanical structures and software.
Covering control interfaces, automated I/O testing, and machine-level commissioning.
Contact Us
For business cooperation and product inquiries, please contact us by email.